Thermal storage radiators

Modern heater for partial storage heating


The heating conductor manufactured from NiCr resistance wire are filled into the storage stone. Thus the energy is almost completely converted into heat directly in the storage stone, without energy losses. The heating fins are welded on individually, so that no crack noise occurs during heating. The finned robust housing provided 6 times larger surface compared with similar heaters. Thus ensures a correct balance of radiant and convection heat, for a feel good effect in the room. An already built-in infinitely variable thermostat controls your room temperature. Our partial thermal storage radiators are designed so that 3-5 hours of electricity are needed on average for 24 hours heat release.



  • Interseasonal or full-season heating
  • Low-energy consumption houses, holiday homes, stationary or mobile
  • Small apartments
  • Private or commercial uses
  • Living rooms, bedrooms, guest rooms, workrooms
  • Heating of bathrooms and toilets
  • Offices, shops, bars, galleries, schools, kindergardens

Technical data

Type of heating

Radiant heat
Natural convection heat


Finned housing completely made of sheet metal
Ceramic storage stone


680x630x70 mm, 36 kg, 1000W
980x630x70 mm, 50 kg, 1500W
1280x630x70 mm, 62 kg, 2000W


Wall mounted option, with fixing accessories
Mobile option, with feet stands or castors


Cable with a plug, 1.5m long


Compact, solid, modern design

Powder coated surface, colour white RAL 9003


Voltage: 230V
Power: 1000-2000W
Protection class IP20

Manual thermostat, 7 levels, range 0°C-30°C
Adjustable anti-freeze mode


  • Heat is directly accumulated and stored
  • An equal combination of radiant and convected heat
  • No crack noise occurs during heating
  • Safe, clean and easy to operate
  • Slimline radiators are 70mm deep
  • No maintance required
  • Supplied with wall fixing brackets
  • Almost without energy losses
  • Two years warranty and service provided

related Products